Solid hardwood ramp profile, specifically designed for joining two floors unequal height. The full ramp will remove a difference in floor height of approximately 15mm. Height adjustable for floors between 15 & 18mm in finished thickness.
Please use the tabs below for more information…….
NB – “Colour Matched” finish only available when ordering a Rafe Olsen floor.
Perimeter edging profile for covering expansion gaps around rooms or hearths
End stop profile for creating a distinct blunt edge, trimming mat wells or hearths
Twin jointing profile for covering expansion gaps between two floors of equal thickness
Step Twin jointing profile for connecting two floors of unequal height (<5mm)
Semi Ramp transition profile for connecting two floors of unequal height (<5mm)
Perimeter edging profile for covering expansion gaps around rooms or hearths
End stop profile for creating a distinct blunt edge, trimming mat wells or hearths
Twin jointing profile for covering expansion gaps between two floors of equal thickness
Step Twin jointing profile for connecting two floors of unequal height (<5mm)
Semi Ramp transition profile for connecting two floors of unequal height (<10mm)
Full Ramp transition profile for connecting two floors of unequal height (<18mm)
Cut from sustainable and responsibly managed Oak trees and lovingly prepared for your trims
Rafe Olsen are able to produce trims and accessories in the exact same finishes we apply to our floors
All of our trims and accessories are hand-finished by our professional team of skilled tradesmen
Solid hardwood ramp profile, specifically designed for joining two floors unequal height. The full ramp will remove a difference in floor height of approximately 15mm. Generally the full ramp profile is used when your engineered wood flooring is being matched to a different type of flooring in another room. Normally this would occur through a door threshold. The ramp can also be used to even up floors on different levels. The WR Ramp profile comes complete with a height adjustable uPVC base section to hold the top section securely in place.
Available in a long and short length and multiple colours. If ordering a Rafe Olsen floor, please select the “colour matched” option and we will apply the same processes to the profiles as we do the floor. This will provide the best possible chance of the profiles and floor being complimentary.
NB – “Colour Matched” finish only available when ordering a Rafe Olsen floor.
Lead times for Rafe Olsen products can vary depending on the items that have been ordered. Generally, the less complicated the finish, the quicker the delivery.
For more information about why, what and when, please follow the link to see our dedicated page on Lead Times & Delivery.
As an indication, please see the following details:
Unfinished/Untreated Oak Trims – Delivery within 3 Days
Bespoke Coloured Trims – Delivery within 14 Days
The quickest and most economical method of delivery will be selected by Rafe Olsen when the order is complete. Small items will be delivered by a parcel courier service and larger flooring orders will be dispatched via the pallet network. Orders delivered on a pallet will not necessarily require a forklift to remove them. Most lorries are equipped with tail lifts and means of manoeuvring pallets to where they need to be left.
On all occasions, consignments will require a signature on delivery. Delivery to a neighbour (or a work address) is perfectly acceptable if they are willing to take responsibly for the goods.
Rafe Olsen two part profiles are quick and simple to fit. Once the base and top section have been cut to the desired length, screw and/or glue the uPVC base channel in place. Once the glue has cured (if using adhesive), the hardwood profile can be tapped into place using a rubber mallet. Adhesive can be applied to the base channel to make the fixing permanent if required.